This guide walks you through the step-by-step process to fully set up your Elo Z30 terminal once it’s powered on and ready for configuration.
The setup should take about 10–15 minutes and requires a Wi-Fi connection or Ethernet cable, plus your Kanpla Admin login.
Step-by-step guide:
Step 1: Connect the device to power. The Elo logo will appear as it boots up.
Step 2: Select Language and Region
Choose your preferred language
Select your correct time zone/region
Step 3: Connect to the Internet
You can either:
Connect via Wi-Fi by selecting your network and entering the password,
or
Plug in an Ethernet cable for a direct connection
Step 4: Choose Setup Method
Select the middle option: “Enroll with Eloview”
Step 5: Once installed, open the Kanpla POS, and sign in using your Kanpla Admin login that has access to the POS Module.
NOTE:
If you experience any issues throughout this process, reach out to [email protected], with a picture of what the screen is showing/saying.
You're done!
Your Elo Z30 till is now fully set up and ready to process orders via Kanpla POS.