Kanpla B2B Workspace

Scales are only integrateble to Android based devices

The cable is a USB-B to USB-A cable. This model is powered directly from the POS device. The USB-A should be connected to the POS device (Elo or Android tablet), and the USB-B should be connected to the scale as shown below:

This is how the cable looks on a CAS PDN. It also shows how to connect it.

2. Check that the scale has the correct configuration

This scale can be configured in 2 ways. Follow the instructions below to set the scale correctly:

2.1 How to set the scale to FLT 14 configuration

Turn off the scale using the power button on the side where the cable is connected

Turn the scale back on while holding the T button

Release the T button after the scale has powered on

1. Turn off the scale using the power button on the side where the cable is connected
2. Turn the scale back on while holding the T button
3. Release the T button after the scale has powered on

The configuration should show “FLT 14”

Change the numbers by pressing the star button*

1. Set the first row of numbers to 1
2. Press the T button to move to the second row and do the same

1. The configuration should show “FLT 14”
2. Change the numbers by pressing the star button*
 1. Set the first row of numbers to 1
 2. Press the T button to move to the second row and do the same
3. Finish by pressing the 0 button

2.2 How to set the scale to ECR Type 3 configuration

Turn the scale back on while holding the 0 button

Release the 0 button after the scale has powered on

1. Turn off the scale using the power button on the side where the cable is connected
2. Turn the scale back on while holding the 0 button
3. Release the 0 button after the scale has powered on

The screen will now display this. Press the 0 button

1. The screen will now display this. Press the 0 button

Select Type 3 by pressing the T button

The next step is to choose r ECR. Press the T button until the display shows this

Confirm the setting by pressing the 0 button twice

The display will show “11111111” and up to “9999999,” after which it will display “0.000”

1. Select Type 3 by pressing the T button
2. Proceed by pressing the 0 button
3. The next step is to choose r ECR. Press the T button until the display shows this
4. Confirm the setting by pressing the 0 button twice
5. The display will show “11111111” and up to “9999999,” after which it will display “0.000”

The scale is now correctly configured ✅

The scale needs to be connected in the Device Settings of the Kanpla POS app.

1. If a scale is already connected, ask the customer to press “Remove device”

A long list of different options may appear (depending on the customer)

Select the device that contains “XXX-FDTI-XXXX”

Ask the customer to go to Sales and select a weighted product. Verify that the scale responds correctly!

1. Open the Kanpla POS app
2. Go to Device Settings
3. Go to Weight/Scale
 1. If a scale is already connected, ask the customer to press “Remove device”
4. Press “Select scale”
 
5. A long list of different options may appear (depending on the customer)
 
6. Select the device that contains “XXX-FDTI-XXXX”
 
7. Select “CAS PDN”
 
8. Ask the customer to go to Sales and select a weighted product. Verify that the scale responds correctly!

Scale (CAS PDN)

2. Check that the scale has the correct configuration

3. Connect the scale to Kanpla POS